Gabatarwa:
PFPP-2 yana ba da filin ajiye motoci guda ɗaya da ke ɓoye a cikin ƙasa da kuma wani bayyane a saman, yayin da PFPP-3 yana ba da biyu a cikin ƙasa da na uku wanda ake iya gani a saman.Godiya ga dandali na sama ko da, tsarin yana jujjuyawa tare da ƙasa lokacin da aka naɗe ƙasa kuma abin hawa yana tafiya a sama.Ana iya gina tsarin da yawa a cikin shirye-shiryen gefe zuwa gefe ko baya-baya, sarrafawa ta hanyar akwatin sarrafawa mai zaman kanta ko saitin tsarin PLC na atomatik na tsakiya (na zaɓi).Za a iya yin dandamali na sama daidai da yanayin yanayin ku, wanda ya dace da tsakar gida, lambuna da hanyoyin shiga, da sauransu.
Jerin PFPP wani nau'in kayan ajiye motoci ne na kansa tare da tsari mai sauƙi, yana motsawa a tsaye a cikin rami don mutane su iya yin kiliya ko dawo da kowace abin hawa cikin sauƙi ba tare da fitar da sauran abin hawa ba da farko. Yana iya yin cikakken amfani da ƙayyadaddun ƙasa tare da dacewa da filin ajiye motoci.
- Dukansu amfanin kasuwanci da amfanin gida sun dace
-Madaidaicin matakan ƙasa uku
-Galvanized dandamali tare da farantin igiyar ruwa don mafi kyawun filin ajiye motoci
- Dukansu na'ura mai ba da hanya tsakanin hanyoyin sadarwa da injina suna samuwa
-Tsarin fakitin wutar lantarki na hydraulic da panel sarrafawa, tare da tsarin sarrafa PLC a ciki
-Code, IC Card da aikin hannu akwai
-2000kg iya aiki don sedan kawai
-Middle post sharing fasalin ajiye farashi da sarari
-Kariyar tsani mai faɗuwa
-Hydraulic overloading kariya
Tambaya&A:
1. Za a iya amfani da PFPP a waje?
Ee.Da fari dai, ƙayyadaddun tsarin shine suturar Zinc tare da ingantaccen ruwa.Abu na biyu, saman dandamali yana da matsewa tare da gefen rami, babu ruwa yana faduwa cikin rami.
2. Za a iya amfani da jerin PFPP don filin ajiye motoci SUV?
An tsara wannan samfurin don sedan kawai, ƙarfin ɗagawa da tsayin matakin zai iya samuwa don sedan.
3. Menene bukatar wutar lantarki?
Matsakaicin ƙarfin lantarki ya kamata ya zama 380v, 3P.Ana iya keɓance wasu ƙarfin lantarki na gida bisa ga buƙatar abokan ciniki.
4. Shin wannan samfurin zai iya aiki har yanzu idan gazawar wutar lantarki ta faru?
A'a, idan rashin wutar lantarki yakan faru sau da yawa a wurinku, dole ne ku sami janareta na baya don samar da wuta.
Amfani:
1. Top ingancin aiki
Muna ɗaukar layin samar da aji na farko: yankan Plasma / waldawar robotic / hakowa CNC
2. Babban saurin dagawa
Godiya ga yanayin tuƙi na hydraulic, saurin ɗagawa yana kusan sau 2-3 cikin sauri fiye da yanayin lantarki.
3. Zinc shafi karewa
Jimlar matakai uku don kammalawa: Yashi mai fashewa don share tsatsa, murfin Zinc da fenti sau 2.Rufin Zinc wani nau'in maganin hana ruwa ne, don haka ana iya amfani da jerin PFPP don gida da waje.
4. Abubuwan da ake raba posts
Lokacin da aka shigar da raka'a da yawa gefe da gefe, za a iya raba maƙallan tsakiya da juna don adana sararin ƙasa.
5. Sharing na'ura mai aiki da karfin ruwa famfo fakitin
Ɗayan famfo na ruwa zai goyi bayan raka'a da yawa don samar da ƙarin wuta ga kowace naúrar, don haka saurin ɗagawa ya fi girma.
6.Rashin amfani da wutar lantarki
Lokacin da dandamali ya motsa ƙasa, babu amfani da wutar lantarki, saboda za a mayar da mai na ruwa zuwa tanki ta atomatik saboda ƙarfin nauyi.
Ƙayyadaddun bayanai
Samfura | Bayani na PFPP-2 | Bayani na PFPP-3 |
Motoci a kowace raka'a | 2 | 3 |
Ƙarfin ɗagawa | 2000kg | 2000kg |
Tsawon mota akwai samuwa | 5000mm | 5000mm |
Akwai fadin mota | 1850 mm | 1850 mm |
Akwai tsayin mota | 1550 mm | 1550 mm |
Ƙarfin mota | 2.2kw | 3.7kw |
Akwai irin ƙarfin lantarki na samar da wutar lantarki | 100V-480V, 1 ko 3 Phase, 50/60Hz | 100V-480V, 1 ko 3 Phase, 50/60Hz |
Yanayin aiki | Maɓalli | Maɓalli |
Wutar lantarki na aiki | 24V | 24V |
Kulle tsaro | Kulle faɗuwa | Kulle faɗuwa |
Kulle saki | Sakin mota na lantarki | Sakin mota na lantarki |
Lokacin tashi / saukowa | <55s | <55s |
Ƙarshe | Rufe foda | Rufe foda |
Sanarwa:
Kariya:
Bayan kafuwar, dole ne abokin ciniki ya shigar da rami mai kulawa daban (tare da murfin, tsani da wucewa zuwa ramin).Hakanan ana sanya sashin wutar lantarki na hydraulic da akwatin sarrafawa a cikin rami.Bayan filin ajiye motoci, dole ne a kiyaye tsarin koyaushe zuwa matsayi mafi ƙasƙanci. .
Game da girman da aka keɓance:
Idan girman dandamali yana buƙatar gyare-gyare bisa ga buƙatar abokin ciniki, matsaloli na iya tasowa yayin shiga ko fita motocin a rukunin wuraren ajiye motoci.Wannan ya dogara da nau'in mota, hanyar shiga da kuma halin tuƙi ɗaya.
Na'urar aiki:
Matsayin na'urar aiki ya dogara da aikin (canza wurin, bangon gida).Daga kasa na shaft zuwa na'urar aiki bututu DN40 mara komai tare da waya taut ya zama dole.
Zazzabi:
An tsara shigarwa don aiki tsakanin -30 ° da + 40 ° C.Yanayin yanayi: 50% a +40 ° C.Idan yanayin gida ya bambanta da na sama don Allah a tuntuɓi MuTrade.
Haske:
Dole ne a yi la'akari da hasken acc.zuwa buƙatun gida ta abokin ciniki.Ana buƙatar haske a cikin shaft don kulawa ya zama mafi ƙarancin 80 Lux.
Kulawa:
Ana iya ba da kulawa ta yau da kullun ta ƙwararrun ma'aikata ta hanyar kwangilar sabis na shekara-shekara
Kariya daga lalata:
Dole ne a gudanar da ayyukan da ba su dace da aikin kulawa ba.zuwa MuTrade Tsaftacewa da Umarnin Kulawa akai-akai.Tsaftace sassan galvanized da dandamali na datti da gishirin hanya da sauran gurɓata yanayi (haɗarin lalata)!Dole ne a koyaushe a ba da iska sosai.