Wholesale China Turntable Mannequin Factory Quotes – FP-VRC : Four Post Hydraulic Heavy Duty Car Lift Platforms – Mutrade

The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for China Car Parking Solutions , Samrt Parking , Hydraulic Pit Car Lift , We are sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy you. We also warmly welcome customers to visit our company and purchase our products.

---

Wholesale China Turntable Mannequin Factory Quotes – FP-VRC : Four Post Hydraulic Heavy Duty Car Lift Platforms – Mutrade Detail:

VRC (Vertical Reciprocating Conveyor) is a transportation conveyor moving car from one floor to another, it is a highly customized product, which could be customized according to customers’ different requirements from lifting height, lifting capacity to platform size!

Q&A：
1. Is this product can be used indoor or outdoor?
FP-VRC can be installed both indoor and outdoor as long as the site dimensions are enough.
2. What is the surface finishing for this product?
It’s paint spray as standard treatment, and optional aluminum steel sheet can be covered above for better water-proof and looking.
3. What is the power requirements? Is single phase acceptable?
Generally speaking, a 3-phase power supply is a must for our 4Kw motor. If the usage frequency is low (less than one movement per hour), a single phase power supply can be used, otherwise it may lead to motor burnt out.
4. Can this product still operate if electricity failure happens?
Without electricity the FP-VRC cannot work, so a back-up generator may be needed if electricity failure happens often in your city.
5. What is the warranty?
It’s five years for main structure and one year for moving parts.
6. What is the production time?
It’s 30 days after prepayment and final drawing confirmed.
7. What is the shipping size? Is LCL acceptable, or it must be FCL?
As FP-VRC is a fully customized product, the shipping size depends on the specifications you need.
As there are some electrical parts and hydraulic parts, and the packages for components are in different shapes, LCL cannot be used. 20 feet or 40 feet container is necessary as per the lifting height.

Introduction

FP-VRC is simplified car elevator of four post type, able to transport a vehicle or goods from one floor to another. It is hydraulic driven, piston travel can be customized according to actual floor distance. Ideally, FP-VRC requires an installation pit of 200mm deep, but it can also stand directly on ground when pit is not possible. Multiple safety devices make FP-VRC sufficiently safe to carry a vehicle, but NO passengers at all conditions. Operation panel can be available on each floor.

Specifications

Model	FP-VRC
Lifting capacity	3000kg – 5000kg
Platform length	2000mm – 6500mm
Platform width	2000mm – 5000mm
Lifting height	2000mm – 13000mm
Power pack	4Kw hydraulic pump
Available voltage of power supply	200V-480V, 3 Phase, 50/60Hz
Operation mode	Button
Operation voltage	24V
Safety lock	Anti-falling lock
Rising / descending speed	4m/min
Finishing	Paint spray

 

FP – VRC

A new comprehensive upgrade of VRC series

 

 

 

 

 

 

 

 

 

 

 

 

Twin chain system ensure safety

Hydraulic cylinder + steel chains drive system

 

 

 

 

New design control system

The operation is simpler, the use is safer, and the failure rate is reduced by 50%.

 

 

 

 

 

 

 

 

Suitable for varies of vehicles

The special re-enforced platform will be strong enough to carry all type of cars

 

 

 

 

 

 

Laser cutting + Robotic welding

Accurate laser cutting improves the accuracy of the parts, and
automated robotic welding makes the weld joints more firm and beautiful

Welcome to use Mutrade support services

our team of experts will be on hand to offer help and advice

---

Product detail pictures:

---

Related Product Guide:

---

We now have a skilled, performance team to supply good quality services for our consumer. We often follow the tenet of customer-oriented, details-focused for Wholesale China Turntable Mannequin Factory Quotes – FP-VRC : Four Post Hydraulic Heavy Duty Car Lift Platforms – Mutrade , The product will supply to all over the world, such as: Greenland , Cyprus , Gambia , With strong technical strength and advanced production equipment, and SMS people purposefully , professional, dedicated spirit of enterprise. Enterprises took the lead through the ISO 9001:2008 international quality management system certification, CE certification EU ; CCC.SGS.CQC other related product certification. We look forward to reactivating our company connection.