VRC (Vertical Reciprocating Conveyor) is a transportation conveyor moving car from one floor to another, it is a highly customized product, which could be customized according to customers’ different requirements from lifting height, lifting capacity to platform size!
Q&A:
1. Is this product can be used indoor or outdoor?
FP-VRC can be installed both indoor and outdoor as long as the site dimensions are enough.
2. What is the surface finishing for this product?
It’s paint spray as standard treatment, and optional aluminum steel sheet can be covered above for better water-proof and looking.
3. What is the power requirements? Is single phase acceptable?
Generally speaking, a 3-phase power supply is a must for our 4Kw motor. If the usage frequency is low (less than one movement per hour), a single phase power supply can be used, otherwise it may lead to motor burnt out.
4. Can this product still operate if electricity failure happens?
Without electricity the FP-VRC cannot work, so a back-up generator may be needed if electricity failure happens often in your city.
5. What is the warranty?
It’s five years for main structure and one year for moving parts.
6. What is the production time?
It’s 30 days after prepayment and final drawing confirmed.
7. What is the shipping size? Is LCL acceptable, or it must be FCL?
As FP-VRC is a fully customized product, the shipping size depends on the specifications you need.
As there are some electrical parts and hydraulic parts, and the packages for components are in different shapes, LCL cannot be used. 20 feet or 40 feet container is necessary as per the lifting height.
Introduction
FP-VRC is simplified car elevator of four post type, able to transport a vehicle or goods from one floor to another. It is hydraulic driven, piston travel can be customized according to actual floor distance. Ideally, FP-VRC requires an installation pit of 200mm deep, but it can also stand directly on ground when pit is not possible. Multiple safety devices make FP-VRC sufficiently safe to carry a vehicle, but NO passengers at all conditions. Operation panel can be available on each floor.
Specifications
Model | FP-VRC |
Lifting capacity | 3000kg – 5000kg |
Platform length | 2000mm – 6500mm |
Platform width | 2000mm – 5000mm |
Lifting height | 2000mm – 13000mm |
Power pack | 4Kw hydraulic pump |
Available voltage of power supply | 200V-480V, 3 Phase, 50/60Hz |
Operation mode | Button |
Operation voltage | 24V |
Safety lock | Anti-falling lock |
Rising / descending speed | 4m/min |
Finishing | Paint spray |
FP – VRC
A new comprehensive upgrade of VRC series
Twin chain system ensure safety
Hydraulic cylinder + steel chains drive system
New design control system
The operation is simpler, the use is safer, and the failure rate is reduced by 50%.
Suitable for varies of vehicles
The special re-enforced platform will be strong enough to carry all type of cars
Laser cutting + Robotic welding
Accurate laser cutting improves the accuracy of the parts, and
automated robotic welding makes the weld joints more firm and beautiful
Welcome to use Mutrade support services
our team of experts will be on hand to offer help and advice